Blogs & News
- Category: Service & Support, Technical Education
- DATE: November 21, 2023
Is Your Laser Tube Failing? How to Diagnose a Dead Laser Tube in ULS Machines
Universal lasers use a carbon dioxide tube that generates ultraviolet light through high voltage. Over time, this diode seal can wear, causing the CO2 to leak and reducing the laser’s power output.
To check if your laser tube is dying, we’ll start by looking at the laser tube itself. To access it, simply open the two latches on either end of the machine in the back. Here, you’ll see a plate that displays the laser tube’s serial number and date of manufacture.
Typically, laser tubes start to fail between 5-8 years, so this is the first indication if you need a new one. But, unless you have a laser tester, it can be difficult to get an accurate reading on the health of the laser tube.
If you’re noticing a lack of performance, your laser tube is older than 5 years, and you’ve ruled out other potential issues such as CPU malfunction, optics or alignment issues, and power issues, there’s a good chance your laser tube is failing.
GET HELP WITH YOUR LASER
Sometimes, you may encounter problems with your laser engraver that require professional help. That’s where our team at H2I Group comes into play. Equipped with a wealth of knowledge and experience, our laser experts are at your disposal to address and resolve any complications that might arise with your engraving equipment. We understand the intricacies of ULS systems and are committed to ensuring your operations run smoothly. Contact us here to submit a service request.
recent blogs
GET STARTED
LET’S TALK ABOUT YOUR PROJECT TODAY
Are you in need of expert guidance for your building project? H2I Group’s experienced professionals are here to assist you with any questions or concerns you may have. Contact us today to learn more about our services and how we can help you achieve your goals.
